China Top Quality Manufacture for CNC Drilling, Punching, Cutting, Milling, Forming Machines of Angles, Beams, Plates and Flanges!
Do the new ones, do the good ones !
|
Product Details:
Payment & Shipping Terms:
|
| Name: | CNC Steel Plate Drilling Machine | Max. Thickness: | 100mm |
|---|---|---|---|
| Rotate Speed: | 20－560r/min | Flange Diameter: | 2000mm |
| Max. Drilling Diameter: | 50mm | Main Spindle Power: | 5.5 KW |
| Highlight: | 2000x2000mm CNC Steel Plate Drilling Machine,Multi Spindle CNC Steel Plate Drilling Machine,2000x2000mm steel plate drilling machine |
||
2000x2000mm CNC Steel Plate Drilling Machine Multi Spindle Drill Head
CNC Steel Plate Drilling Machine With double/triple or multi-drill heads ,the drilling and milling machine can drill numerous holes once time, machining metal plate ,sheet, frange with high efficiency,using less time and less machine .
Equipment introduction:
Lateral skateboard and power head
The lateral sliding plate is installed on the two linear guide rails in front of the gantry, and the ball screw is driven by the AC servo motor to make lateral movement. The power head is installed vertically on the lateral slide. Follow the lateral slide to do lateral movement (Y 1 Y2 axis). The main shaft of the power head adopts hydraulic sensor control, which automatically performs the conversion of fast forward, work forward and fast backward, and does not need to manually set the length of the drill bit and the thickness of the workpiece to be processed. The main shaft gear reducer and the main motor are imported from Germany. A quick-change module with Morse's No. 4 taper hole is installed under the main shaft, and Morse's 3# and 2# reducer sleeves can be installed according to requirements, and drills with different diameters below Ф50mm can be installed. The rotation speed of the main shaft of the drilling machine is steplessly adjusted by the
Specifications:
| Item | Parameter | |
| Workpiece size | Width x length | 2000x2000mm |
| Thickness | Max.100 | |
| Diameter | 2000mm | |
| Spindle | Quick-change connector | Morse 4# |
| Drill diameter | Max.Φ50mm | |
| Speed-varying method | Inverter stepless speed regulation | |
| Rotate speed | 20－560r/min | |
| Stoke (Z axis) | 180mm | |
| Feeding | Hydraulic cylinder drive | |
| Workpiece Clamp | Clamp thickness | 15－100mm |
| Number of clamping cylinders | 12 | |
| Clamp force | 7.5kN | |
| Clamp open | Foot switch | |
| Cooling liquid | Method | Forced loop |
| Capacity | 300L | |
| Hydraulic | Clamp force | 6MPa(60kgf/cm2) |
| Fuel tank capacity | 90L | |
| Motor | Main spindle | 5.5kW |
| Hydraulic pump | 2.2kW | |
| Cooling pump | 0.45kW | |
| X-axis servo system | 2kW | |
| Y-axis servo system | 2x1kW | |
| Machine size | LxWxH | 6490×3880×2750mm |
| CNC axis quantity | 3 | |
| Positioning speed | 10000mm/min | |
| Machine size | LxWxH | 6490×3880×2750mm |
Contact Person: Gaven
Tel: +86-13306412803
Fax: +86-531-5553-1208
